|
Dubno Oil Primer 10 Liters
Dubno Oil Primer 10 Liters
For low-impact woods e.g. dust prevention for wood ceilings. Also for use as a primer for subsequent treatments with LIVOS-stains, -waxes and lacquers. Not to be used on cabinets, floors, counter tops and furniture.
LIVOS products contain organically sourced ingredients and are never tested on animals.`
|
Preparation - Pre-treat resinous woods by brushing with SVALOS Citrus Thinner and tropical woods with KIROS Shellac Thinner.
Interior application - Get even saturation and deep penetration of the wood surface with generous application of DUBNO. For absorbent surfaces (Like crosscut wood), allow the first coat to dry for 24 hours before applying the second coat. After 20 to 30 minutes, remove any unabsorbed product from the treated surface with a dry paintbrush or a lint-free rag to prevent unevenness in the gloss finish. Wax or stain (preferably with LIVOS products) over interior DUBNO as desired.
Exterior application - Depending on surface absorbency, apply a more or less generous coat of DUBNO and remove any unabsorbed product from the surface after 20 to 30 minutes. Allow 8 to 24 hours drying time before sanding the first coat. Use any of the following products over exterior DUBNO; KALDET Transparent Wood Stain/Glaze, TAYA Solid Wood Stain, VINDO High Gloss Oil Paint, or AMELLOS All Weather Paint.
Preparation for Renovation of Old Coatings - Pore-clogging coatings (oil-based paint, lacquers, varnishes, wax coats)must be sanded or stripped to completely remove residue. Surface must be dry, solid, absorbent, neutral, clean and free of dust. Follow application instructions and watch drying carefully for potential absorbency problems.
Renovation - Pay close attention during treatment to spot absorbency problems. Exterior priming is only necessary on completely weathered wood.
|
|
|
|